LOCATION

Model Colony Malir Karachi, Karachi, Karachi, Sindh, Pakistan

Condition
Brand New

DESCRIPTION


SC8108 Digital Network Cable Tester (Green BOX)

Features:
A) One person is enough to complete cable continuity check.
B) Check wiring error in 5E, 6E, Coaxial cable and telephone line. Such as open circuit, short circuit, jumper wire, reverse connection or cross talk interference.
C) Locate the wiring or connection error.
D) Measure cable length and determine the distance of open circuit and short circuit.
E) Dynamically calibration cable length and make length measurement as accurate as 97%.
F) Simple and easy use. Big screen to display test clear.
G) Portable unit with long battery life (waiter-case 50 hours),. Automatically time-delay shut off.
H) Measure length and pair with or without far-end recognizer.
I) Locate cable and there are 8 far-end passive test jacks (ID NO. ID1-ID8).
J) Far -end recognizer with prompting voice.
K) Self-checking function and automatically compensate any change in battery capacity or ambient temperature.
L) Single board computer software watchdog design and reliable operation.

Product Name:

SC8108 Network Digital Cable Tester
Brand:
OEM
Model No.:
SW-WZ-CXY1
Power Supply:
4x1.5V Size AA batteries with power consumption 16 mA
Display:
Special 4x16 character big screen LCD lattice (valid visual filed 61.6x25.2mm)
Type of Test Cable:
STP/UTP twin twisted cable, coaxial cable, telephone line
Working Ambient Temperature:
-10°C+ 60°C
Tester Port:
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L). Far-end recognizer RJ45 port (R). The extra BNC RJ11 converts are used
to measure and check the continuity of coaxial cable and telephone line.
Overall Dimension:
180x80x40mm
Length Measurement of Twin Twisted Cable:
Scope: 1350M (4429 ft)
Calibration accuracy: 5% ( +/-0.5M or +/-1.5 ft)(calibrating cable > 5M)
Shipment accuracy: 5% ( +/-0.5M or +/-1.5 ft).(AMP, AT& Class 5 cable)
Display: M or ft
Length Calibration:
User can set calibration factor by himself by himself with a given length cable. The length of calibrating cable is more than 5M.
Wire Sequence and Locating Cable Error:
Check errors such as open circuit, short, reverse connection, cross-over or cross-talk interference.
Locating Cable:
8 far-end passive test jacks (ID1>= Id8)
Automatic Time-delay shut off Time:
The tester does not operate for 30 minutes.

Mention that you found this ad on DealMarkaz.pk when you call.

Published 4 months ago
Views 19
Ad Id 167432