S-1,24-C, Sunset Lane No.1, Phase II (ext) DHA, Dha, Karachi, Sindh, Pakistan



This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint,enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast. There are five data groups, and readings will be automatically stored to memory for general groups (Not for direct group).
Each group has individual statistics, alarm limit settings and calibration. User can recall and delete specified readings easily. User does all operations via standard menu so easily. User can press the CAL button to start calibration freely.

Product Specification

Display Type Digital
Least Count 0.1 micron
Measuring Range 0 to 1500 um
Accuracy +/- (3% of readings+2um),+/- (3% of readings + 0.078mils)
Weight 92g (3.24oz)
Size 118 x 56 x 30 mm
Resolution 0.1 micron
Coating Paint,plating,plastic,powder,spray,nickel,zinc,chrome etc
Memory 10 groups (60 readings each)
Power supply Two 1.5V AAA battery


128x128 dot matrix LCD display, standard menu operations
Two measure mode single and continuous
Two group mode direct (DIR) and general(GEN), readings will be lost when power off in direct mode, and not be lost in
general mode. 80 readings can be stored for each group
Zero point calibration and multi-point calibration(up to 4 points) for each group
User can recall, delete specified readings, or delete group readings
Statistics display mean, minimum, maximum and standard deviation
Three probe mode auto, magnetic and eddy current
User can set high or low limit alarm for each group
Power off automatically
USB interface to data transmission
Low battery and error indication

More Specification

Measuring principle Magnetic induction (F-probe) and eddy current (N-probe)
Calibration One to four point calibration, zero calibration
Data Group One direct group (readings not be stored to memory), four general group (readings can be stored), and each group have individual statistics, alarm settings and calibration
Statistics No. of readings, mean, minimum, maximum and standard deviation
Units um, mm and mils
Alarm User can set the high/low alarm, and alarm icon displayed on LCD when over the limit
Minimum curvature radius convex 1.5mm(59mils) and concave 25mm(984mils)
Minimum measuring size Diameter 6mm(236mils)
Minimum thickness of substrate F-probe 0.5mm(0.02"), N-probe 0.3mm(0.012")
Computer interface Download data via USB interface
Operation temperature 0 to 40(32 C to 104 C)
Storage temperature -20 to 70(-4 C to 158 C)

Mention that you found this ad on DealMarkaz.pk when you call.

Published 2 years ago
Views 158
Ad Id 124402