Berger Apexior No.3 (anti-corrosive coating)
DESCRIPTION
Berger Apexior No.3 (anti-corrosive coating)
Scope:
Apexior No. 3 is an anti-corrosive coating for external surfaces of boilers, condensers, chimneys, etc.
Uses:
Apexior No. 3 can be used on boiler drums, tubes, water walls, economisers, evaporators, steam accumulators, calorifiers, steam turbine casings, and water softners in contact with water above 93˚C (200˚F) minimum.
Drying Time:
Apexior No. 3 dries in 3 to 4 hours. Overcoating should be done after 24 hours. After the last coat, allow drying-time of 24 hours to permit system to harden.
Coverage:
Apexior No. 3 covers 9 to 12 meter square per litre at 38 microns DFT depending on surface roughness.
Packaging:
Apexior No. 3 is available in 5 litre packs.
Mention that you found this ad on DealMarkaz.pk when you call.