LOCATION

Lda, Lahore, Punjab, Pakistan

Condition
Brand New

DESCRIPTION


4CH 12/24V Smart Wireless WiFi Controlled by Phone On Android and IOS




4CH 12/24V Smart Wireless WiFi Light Switch wi-fi Module Controlled by Phone On Android and IOS for Home Automation Garage Door


Introduction:
1 Working voltage: DC 7V-24V
2 Maximum load: 10A
3 Working temperature: 0-60 centigrade
4 Controlled method: Smartphone APP + Manual Control
5 Transmission way: WIFI
6 Transmission Distance: As far as your phone be connected with internet
7 Channels: 4 Way

How to connect phone with switch?
1 Download and install the software of “eWeLink” from APP store or Google play store.
2 Follow “eWeLink” instructions to register an account on it.
3 Log in your account of “eWeLink”.
4 Press any manual control button (S1,S2,S3,S4) for 5 seconds until you see the LED D3 light flash quickly, then release it. Now add device on mobile phone by eWeLink APP according its introduction.
5 Now you can use your phone to control the switch under 2G/3G/4G signal.
6 You can name your own device and control it only by yourself.
7 You can also share your device with your family or friends.

How to set working mode?
Supply AC 85-250V power to the relay.
1: Press mode button until you see D7 flash 3 times, release button, now it is self-lock.
2: Press mode button until you see D7 flash 2 times, release button, now it is inter-lock.
3: Press mode button until you see D7 flash 1 time, release button, now it is momentary.

What is the difference between working mode?
1 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF
2 Inter-lock: Press remote button A , receiver CH1 ON, and receiver CH2,CH3,CH4 OFF.
3 Momentary: Press remote button A, receiver CH1 ON. After 1 seconds, receiver CH1 OFF

Mention that you found this ad on DealMarkaz.pk when you call.

Published 2 years ago
Views 52
Ad Id 118533